Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 41
2 - PERFORM HOME SEQUENCE ROUTINE
Before the machine is homed, the screen displays a “PERFORM HOME
SEQUENCE” prompt.
Notes:
Whenever the “PERFORM HOME SEQUENCE” prompt appears,
go to the Home Machine Menu and perform the home sequence. When the
machine displays the home sequence prompt, it will not permit the running of an
auto polish or slurry flush cycle until the home sequence is performed.
Follow the steps below to display the Home Machine Menu:
Operator Action Explanation/Screen Display
1. <Upper f/
Lower f> On the bezel keyboard, set the Upper
f/Lower f key to “Upper” by pressing
the key until the light next to Upper f
is illuminated.
2. <Alpha> On the bezel keyboard, set the Alpha
key to “Off” by pressing the key until
the light is turned off.
3. <F9> Press the F9 key to choose “Select
Menu”.
4. <F9> Display the alternate list of menus by
pressing the F9 key to select
“OTHER”.
5. <F5> Press the F5 key to display the
Home Machine Menu, shown
below.
To Next Page
Loading...
