Strasbaugh Software/Computer Maintenance
Version 4.0 - February 1998 12 - 9
RESTORING POLISH RECIPES
AND MACHINE DATA FILES
Procedure to Restore Files
CAUTION: THIS SHOULD BE DONE BY QUALIFIED PERSONNEL
ONLY--WHEN IN DOUBT, CONTACT THE FACTORY!
1. Turn the machine off and remove the Polish Section Left Side Service
Door.
2. Pull out the service door interlock to defeat it.
3. Turn the machine back on and wait until the software restarts.
4. Quit the software by typing “Alt-Q”. (Hold down the Alt and Q keys
together.) The prompt should now show C:\QB45>.
5. Insert the diskette containing previously backed up files into the drive in
the computer located behind the Polish Section Left Side Service Door.
6. Using DOS copy commands, copy only those files from the diskette to
the \QB45 directory on the hard disk directory, depending on the reason
files are being restored.
WARNING--this overwrites files on the machine computer’s hard
disk.
7. Remove the diskette containing the backup files.
8. Turn off the machine and replace the service door.
9. Turn the machine on to restart the software.
To Next Page
Loading...
