4
This appliance has no user serviceable parts. Do not attempt to open, service, or
modify this device.
The appliance should be plugged into its own individual electrical outlet. This
provides the best performance and avoids overloading the house wiring circuits,
which could cause a fire hazard.
This appliance is intended to be used in a free-standing installation only. Do not
recess it or build it into a cabinet.
Ensure that there is at least 5" of space between the back and sides of the cooler
and any nearby walls or furniture to allow sufficient air circulation to cool the heat
sink.
This appliance uses thermoelectric refrigeration technology (no compressor) and is
not designed for use in hot areas, such as garages, warehouses, or outdoors.
Do not install this appliance in, on, or near heat sources, such as a fireplace, stove,
radiator, etc. Do not install it in direct sunlight.
Unplug the appliance from the AC power outlet before cleaning or moving the
cooler.
Do not install this appliance in moist areas.
If power is lost, minimize temperature loss by minimizing the number of times you
open the doors. If power will remain off for more than a few hours, take proper
steps to protect any perishable items.
To Next Page
Loading...
