9
6. Wash the outside surfaces of the cooler using a solution of warm water and mild
detergent. Wring any excess water out of the cloth or sponge before cleaning the
control panel or any electrical parts.
7. Rinse well and wipe dry using a clean, soft cloth.
Moving the Cooler
1. Unplug the cooler from the AC power outlet.
2. Remove all contents.
3. Either remove the shelves or securely tape them in place.
4. Tape the doors shut.
5. Use a blanket or similar item to protect the outside of the appliance.
TROUBLESHOOTING
Q1: The cooler does not operate.
A1: Check that the appliance is plugged into a nearby AC power outlet. Verify that the AC
power outlet is live by plugging in another device, such as a lamp.
Q2: The control panel will not operate.
A2: The control panel may be locked. Press and hold the button until the control panel
beeps to unlock the controls.
Q3: The wine cooler does not get cold enough.
A3: Try using a lower temperature setting. Ensure that the appliance is installed in a
location with an ambient temperature between 72 ~ 78°F (23 ~ 26°C). Ensure that the
doors are fully closed. Do not open the door too often. Check that the door seals are
not dirty and are in good condition.
To Next Page
Loading...
