13
CONNECTING A REMOTE ANTENNA
The ports labeled “GPS” and “ADS-B” on the side of the receiver are for
connecting remote antennas. To connect the receiver to a remote antenna,
insert the remote antenna cable connector into the respective receiver
port and use the suction cups or magnet included with the remote antenna
to place the antenna in its mounting location. Remote GPS antennas are
available for Stratus 2S only.
WARNING: Ensure you are connecting the antenna to the correct port.
Inserting the antenna into an incorrect port may result in permanent
damage to the port and/or the antenna.
(2S only)
To Next Page
Loading...
