StreamLight TLR-1s - Accessories; Remote Switch Options; Maintenance

Straight or Coiled
Cord Available
adjustment is located on the underside of the TLR-2
®
model laser cartridge. With the TLR-2
®
model
pointed down range a clockwise turn of the adjustment screw will move the laser down (POI up).
A counter-clockwise turn on the adjustment screw will move the laser up (POI down). Move the laser dot in
the direction that the shots are hitting the target (example: If the bullets are striking low and right, move
the laser dot down and right to coincide with the bullet strike).
NOTE: When making large adjustments there may be an interaction that causes the laser to move diago-
nally or bind. It may become necessary to rotate the opposing adjustment screw counterclockwise to allow
the laser cartridge to move to the desired position.
Accessories
TLR Remote Switch
(TLR-1 HPL
®
shown)
TLR Contour Remote Switch
(TLR-1
®
Shown)
(Contour remote not recommended for use with the TLR-2 HL
®
G)
Maintenance
The TLR rail clamp tensioning bolt requires an application of high quality gun oil to keep it rust free. Use a soft
cloth and mild detergent to clean the glass LED lens and keep it free of dirt and grime. The laser aperture on
the TLR-2
®
models can be cleaned with a Q-tip (or similar item) and mild detergent.
NOTE: Always avoid aggressive cleaning solutions as they may damage the TLR.