To Next PageTo Next Page
Need help?Do you have a question about the strex SP28 and is the answer not in the manual?
Describes the Strex Bluetooth receiver as a compact and stylish music receiver for devices without Bluetooth.
Instructions for end users, noting potential differences between illustrations and the actual product.
Details the Bluetooth version (V5.0 +EDR) and frequency range (2.4GHz) of the receiver.
Specifies the output power class (Class2) and supported Bluetooth profiles (HFP/HSP/A2DP/AVRCP).
Covers Bluetooth range (up to 15M), charging time (1.5 hours), and playing time (up to 12 hours).
Indicates the required charge voltage for the device is DC 5.0V.
Identifies key components like the multifunction button, volume controls, USB port, indicator, and microphone.
Details the function of each numbered part in the product diagram, including buttons and ports.
Guide on connecting the receiver to stereo systems and pairing with a phone for music playback.
Instructions on how to charge the receiver, including indicator lights and estimated charging time.
Explains low-voltage alerts and the procedure for powering the receiver on and off.
Step-by-step guide to pair the receiver with a mobile phone via Bluetooth, including code entry.
Instructions on how to connect two Bluetooth devices simultaneously to the receiver.
Guidance on how to answer calls using the receiver for both iPhone and Android devices.
Details on ending calls, rejecting calls, and redialing the last called number.
Instructions for controlling music playback, including play/pause, next/previous song, and volume adjustment.
Information on the proper disposal of the product as electronic waste to protect the environment.
General