INSTRUCTIONS
8
Prepare for use
Placement
Insert 8x AA batteries and an empty microSD card (maximum
32GB) into the wildlife camera.
Pay attention! When using an AC adapter, there should be no
batteries in the unit.
Slide the o / test / on button to “on”. The display will turn o
after 15 seconds. The camera is now ready for use and will
record images.
1.
3.
How to use the Wildcamera
Setup
View recordings
Slide the o / test / on button to “test” to enter the setup menu.
In this menu you can select the desired settings and view
images. See the chapter “functions” for all options.
Slide the o / test / on button to “test” and click the “REPLAY”
button to replay the images.
It is also possible to read the microSD with a computer or
to connect the wildlife camera to a computer by using the
supplied USB cable.
2.
4.
To Next Page
Loading...
Need help?
General
