To Next Page

To Previous Page

31 BA_VEB100-2-4-5_A5-3_230118_en.doc

5.4 Soft start and Sewing foot lifting

Soft start

Fig. 9

Light at no. 1 is on, soft

start is active. Number of

softstart stitches can be set

with t 05 01.

2 stitches are the basic

setting.

Light at no. 1 is off,

softstart is deactivated.

Sewing foot lifting

Fig. 10

Light is on, the fabric support arm remains open after the end of sewing and after releasing the pedal

position -2.

Light is off, the fabric support arm closes after the end of sewing and as soon as the pedal position -2 is

released.

Table of Contents5
General Notes on Safety7
General Notes9
Operating Instructions9
Class Description, Serial Number and Initial Basis for Description9
Range of Application and Intended Use9
Power Supply10
General Notes10
Function Sequence, Machine Class and Operating Concept10
General Function Sequence10
Technical Data of Machines11
Class VEB100-211
Class VEB100-413
Class VEB100-515
Setup and Installation17
Unpacking the Machine17
Setting up the Machine17
Direction of Rotation on Machine19
Motor Drive Using Tooth Belts19
Tension of Toothed Belt (Fig. 1)19
Machine Positions20
Notes on Usage22
Needles and Threads22
Inserting the Needles22
Threading and Thread Insertion24
Thread Tension25
Thread Take-Up Lever25
Stitch Depth Control25
Adjusting the Stitch Depth25
Cloth Retainer (Fig. 6)26
Setting the Plunger Limit Stop for Sewing over Cross Seams28
Setting the Automatic Plunger28
Setting the Cloth Retainer Cl. VEB100-428
Sewing Material Transport29
Adjusting the Stitch Length29
Adjusting the Upper Feed Dog29
Interval (Cl. VEB100-2, -4)30
Activate and Adjusting the Interval30
Sewing Drive30
Operating the Machine31
Switching on31
Operating and Function of the Control32
General32
Placing and Removing the Fabric - Sewing Process34
Soft Start and Sewing Foot Lifting35
Calibrate Pedal36
Change Pedal Steps37
Change Speed Curve38
Sewing38
Seams with Blind Stitches39
Sewing with Folder40
5.6.2.1 Setting the Folder40
5.6.2.2 Replacing the Folder42
Hemming with Folder (Cl.veb100-5)42
Seaming with Roll Hemmer (Cl. VEB100-4)43
Attaching Facings43
Sewing Lamp44
General Notes44
Sewing Problems and Troubleshooting46
Servicing the Machine49
General49
Variable Sewing Tools49
Optional Extras53
Thread Trimmer53
Hemmer53
Digital Display 392.063753
Pneumatic Lifting53
Stand Set53

Brand	Strobel
Model	VEB100-2
Category	Sewing Machine
Language	English

Strobel VEB100-2 Operating Instructions

Table of Contents

Other manuals for Strobel VEB100-2

Questions and Answers:

Strobel VEB100-2 Specifications

Related product manuals