Strobel VEB100-2 - Change Pedal Steps

33 BA_VEB100-2-4-5_A5-3_230118_en.doc
5.5.1 Change pedal steps
You can use pedal steps to specify how quickly the maximum speed is reached. The
fewer pedal steps you specify, the faster you reach the maximum speed.
To change the pedal levels:
1. Call up parameter t 08 21.
2. Press the “OK“ button.
The LED of the "P" button flashes. The display shows the currently set number of
pedal steps.
3. Press the "D+" or "D-" key repeatedly until the desired number appears on the
display.
4. Confirm with the "OK" button.
You can navigate to the next parameter to change the speed curve.