9
MOTOR & PUMP
The motor, the pump and the pressure switch are sensitive items subject to wear, they are
integrated into a single module and need preventive maintenance to extend the lifespan.
To keep the pump head in proper operating condition after each application, run the
sprayer with clean water in open circuit for a few minutes. Never leave the pump with
chemical inside over 8 hours, these products may cause clogging and cause the sprayer
to malfunction . To preserve the engine, do not put it in any kind of liquid and protect it
from moisture as far as possible.
SECURITY CONSIDERATIONS
Always use appropriate protective equipment. Do not eat, drink or smoke while handling
these products and avoid direct contact with skin. Restrict the use of this machine to
qualified personnel. Read very Carefully the instructions of p
roducts employed. For the
preparation of the mixtures, use accurate containers. After application & working, clean the
sprayer with clean water. Wash hands and face and change clothes. Observe good
agricultural practices, avoiding dealing with wind or elevated temperature. Keep children,
bystanders, animals, etc. In a prudent distance. I
n case of poisoning, do not leave the
affected person alone. Flush with much water affected areas and remove contaminated
clothing. Seek immediate medical at-tention t
o the product label.
To Next Page
Loading...