StrombergCarlson.com • 231.947.8600
11"
7"
12"
8.5"
12"
12"
Safest Design
can add 15"
additional length,
however, not
recommended.
12"
12"
12"
12"
Roof Mount
92.5"
5"
CL to CL
INS-LA401LA401BA 11.20.2020
Universal Exterior RV Ladder
Model: LA-401, LA-401BA
Universal Exterior RV Ladder LA-401, LA-401BA
Thank you for purchasing the Stromberg Carlson Universal Exterior
RV Ladder.
Read these directions thoroughly before assembly. When assembled
and used properly, this ladder will provide many years of trouble
free service. This kit contains components and hardware for one
complete exterior ladder. Complete the following easy steps and
you will be ready to use your new ladder.
Tools Needed for Installation
#2 Phillips screwdriver
Hack saw or tube cutter
Drill
3/16” and 1/4” drill bit
Masking tape or pencil
Adjustable wrench or pliers
6
1
Carton Contents and Assembly Diagram
PART # MODEL # DESCRIPTION QTY
1LA-401-A1 Top U-Shape Ladder Section 2
(1LA-401BA-A1)
1LA-401-A2 Middle Straight Ladder Section 1
(1LA-401BA-A2)
1LA-401-A3 Bottom J-Shape Ladder Section 1
(1LA-401BA-A3)
8535 5” Standoff Assemblies 4
(8535-B)
8525-BK Swivel Castings (hinges) 2
8521-BK Roof Mount Brackets 2
(8521-BK-B)
1LA-401-B #10 Sheet Metal Screws 28
#10-24 x 30 mm Bolts and Nuts 6
#10-24 x 37 mm Bolts and Nuts 2
1
2
3
4
5
7
6
2
3
4
5
4
CAUTION: All screws connecting the ladder to the RV must
be fastened to the RV’s blocking or sub frame. If you are
unsure about the structure location, contact your trailer
manufacturer. It is unsafe to use a ladder that is not connected
to the RV’s blocking or sub frame. Maintain safe contact with
your new ladder at all times while ascending or descending.
Be sure to use an outdoor type sealant at all points where holes
are drilled into your RV.
Maximum weight capacity – 250 lb when properly installed.
To Next Page
Need help?
General
