Strongarm MightyMount User Manual

What’s Included
A) 1/4” Hex Key
B) (4) Display Thumb Screws (M4 x 8)
C) (4) Display Thumb Screws (M4 x 12)
D) Track cover
Tools You’ll Need
• #1 Phillips screwdriver
• Wire Cutter & Tie Wraps (for securing
keyboard and mouse cabling: see Step 4 for
instructions on accessing prewired USB hub)
1. Install Mounting Track*
* Refer to track installation instructions
MightyMount
Quick Start Installation Guide
STRONGARMhealthcare
Visit strongarmhealthcare.com to view our installation video.
2. Install Onto Track
3. Level and Tighten
Use 1/4” Hex Key to Tighten Four Slider Key Bolts

Strongarm MightyMount Specifications

General

Category	Racks & Stands
Material	Steel
Color	Black
Product Dimensions	Varies by model
Item Weight	Varies by model

Summary

Quick Start Installation Guide

Install Mounting Track

Install the mounting track onto the desired surface.

Install Onto Track

Mount the MightyMount arm onto the installed track.

Level and Tighten

Adjust and secure the arm using the hex key.

USB Hub Access

Access the USB hub by sliding the writing surface.

Install Display

Attach the display to the MightyMount using thumb screws.

Run Cables and Install Cable Guard

Secure cables to the arm using tie wraps and the cable guard.

Install Track Cable Cover

Cut and install the track cable cover.

Operation Guide

Vertical Adjustment

Adjust the vertical position of the mount.

Mounting Rotation

Rotate the entire mount assembly.

PatientView Display Rotation

Rotate the display on PatientView models.

Pull Out Keyboard Tray

Extend the keyboard tray for use.

Display/Keyboard Rotation

Rotate the display and keyboard.

Display Tilt

Adjust the tilt angle of the display.

Slide Out Mouse Tray

Extend the optional mouse tray.

Fold-up Keyboard

Fold the keyboard up for storage.