Stroxx 101-156 - Quick Start Guide; Initial Setup Steps; Unlocking and Locking Operations; Unlocking Procedure

5
Quick Start Guide
1. Open the Lock Box 2. Loosen the xing screw and
remove battery cover
3. Insert AAA Alkaline
battery x4
4. Secure battery cover tightly
with screw
5. The LED light lights up and
buzzer beeps after power on
Unlocking(DefaultCode:011234)
1. Use your palm to wake up the device.
2. Key in a valid pass code.
3. The status indicator will light up green once unlocked.
The default code is 011234, if the pass code has been
changed, press the new pass code.
Locking
Auto Relock
Simple close the door in place, the
Lock Box will lock up automatically
with a long beep.