catalogue of spare parts with marked spare parts. In case of machine trouble
please go to nearest authorised service of Tovarna Muta.
WARNING!
When buying the machine please demand confirmed
indemnity bond from the dealer. With confirmed indemnity
bond you carry guarantee intervention into force. When
ordering spare parts please state the machine type, year of
production and code of spare part you are ordering.
5. USE OF MAESTRAL
Motocultivator MAESTRAL is multipurpose machine, in combination with
various attachments is performing particular works like cultivating of land on the
field or in the garden with attached rotary tiller, mowing – haymaking with
attached mowing system and cutter bar, ploughing, transport …
Superiority of the machine is multifunctional, it can perform various works, it
is easy to handle with, light machine regarding to it’s functionality.
Motocultivator MAESTRAL we can use together with attachments, made by
Štruc Management, adapted for use on this machine.
Regarding to the work we adjust also the speed of work. MAESTRAL has a
lot of possibilities in both directions. For harder work conditions we can choose
lower gear, for easy work we can choose higher gear. The work can be done more
efficiently and safe.
6. DESCRIPTION OF INDIVIDUAL FUNCTIONS OF THE
MACHINE
The handle levers on the machine we will describe in position of machine,
when the machine is ready for mowing, that means that in front of you is first the
engine thereafter is gearbox (Pic. 1). For proper functioning of the machine all the
levers should be adjusted properly, only in that case the work with machine is
easy and correct.
Handle bar with steering functions
- adjustment of working height of handle bar you achieve with pushing of lever
No.7 till first position, then raise or lower the handle bar regarding your body
height and attachment you are using (Pic.2)
adjustment of side deviation of the handle bar you achieve also with pushing
of lever No. 7 but till second position then you turn the handle bar to right or left
side (Pic. 11). After releasing the lever the cork should stuck into the
-4-
739492
To Next Page
Loading...