What to do if Stryker Medical Equipment jack will not raise to full height?
If the Stryker Medical Equipment jack won't raise to its full height, add hydraulic fluid. Also, check for any leaks in the system.
What to do if Stryker Medical Equipment jack will not hold in raised position?
If the Stryker Medical Equipment jack won't hold in a raised position, first, completely close the needle valve. If it now holds, replace valve #1. If it still doesn't hold, replace valve #2.
How to fix Stryker Medical Equipment jack that will not pump up and the jack actuator rod may or may not move?
If the Stryker Medical Equipment jack won't pump up, and the actuator rod may or may not move, remove excess air (vacuum) from the system.
What to do if Stryker Medical Equipment jack will not pump up but the jack actuator rod does move when the pump pedal is activated?
If the Stryker Medical Equipment jack won't pump up, but the jack actuator rod does move when the pump pedal is activated, replace valve #2.
Details key specifications for the 1068 Head/Neck SurgiBed.
Defines the meaning of warning, caution, and note symbols used in the manual.
Instructions for cleaning the stretcher surfaces and Velcro components.
A checklist for bi-annual inspection and maintenance tasks for the stretcher.
Procedure for adjusting the siderail latch mechanism to reduce play.
Steps to adjust the counterbalance for the arm board for proper operation.
Procedure for replacing the enhanced clearance head/neck assembly.
Procedure for adjusting the pedal linkage on the dual side control base.
Procedure for adjusting the pedal linkage on the dual end control base.
Detailed steps for replacing caster assemblies on the stretcher.
Instructions for installing and removing caster wheel covers.
Troubleshooting guide for common hydraulic system problems and their solutions.
Procedure to check and maintain the hydraulic fluid level in the system.
Steps to purge air from the hydraulic system to ensure proper function.
Procedure to adjust the rate at which the stretcher descends.
Instructions for replacing hydraulic check valve #1.
Procedure for replacing hydraulic check valve #2.
Procedure for replacing hydraulic check valve #3 (Poppet).
Procedure for adjusting the stretcher's brake system.
Identification of lubrication points on the stretcher base.
List of all parts for the 1068-1-10 Side Control Base Assembly.
List of all parts for the 1068-2-10 End Control Base Assembly.
Part numbers for departmental labels used on end control stretchers.
List of all parts for the 1068-30-10 Litter Assembly.
List of all parts for the 1068-32-10 Crank Fowler Subassembly.
Details the warranty terms and conditions for Stryker products.
Information on how to contact Stryker for parts and technical assistance.
Overview of extended warranty options available from Stryker.
Procedure and conditions for returning merchandise to Stryker.
Instructions for handling claims related to damaged merchandise during shipping.
General| Brand | Stryker Medical |
|---|---|
| Model | 1068 |
| Category | Medical Equipment |
| Language | English |
To Next Page