EasyManua.ls Logo

Stryker Crossfire Footswitch - Operation; Footswitch Control Overview

Stryker Crossfire Footswitch
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-8
Operation
Warning e Crossre™ system is intended for use only by licensed
medical professionals, properly trained in the use of
electrosurgical equipment and techniques. e Crossre™
system generates potentially hazardous levels of energy that
can result in injury or even death if improperly used.
Before using the Crossre™ system in an actual procedure,
verify that each component is installed and functioning
properly. Improper connection may cause arcing or
malfunction of the handpiece or console, which can result
in injury, unintended surgical eect, or product damage.
To avoid risk of re, do not operate the footswitch in the
presence of a ammable anaesthetic mixture with air,
oxygen, or nitrous oxide.
e RF and shaver handpieces can be controlled by the Crossre™ footswitch.
e default footswitch controls are shown below. To customize button
assignments, contact your Stryker representative.
Note: To keep the footswitch clean during use, Stryker recommends using
disposable bags (P/N 0277-500-100). Contact your local Stryker representative
for ordering information.