Stryker Pello User Manual

12 www.stryker.com
EN 700000890732 Rev-AE
Accessory Disposal/Recycle
• ALWAYS follow local, state and federal regulations regarding the
handling and disposal of biohazardous materials.
• ALWAYS follow local, state and federal regulations regarding the
disposal of sharps.
Troubleshooting
WARNING: DO NOT disassemble or service this
equipment unless otherwise specified.
NOTE: For service, contact your Stryker sales representative or call
Stryker customer service. Outside the US, contact your nearest
Stryker subsidiary.
PROBLEM CAUSE SOLUTION
Handpiece is not
recognized by
console.
The console
software is not
compatible with the
handpiece.
Contact Stryker
to obtain
console upgrade
information.
Accessory does
not turn.
Accessory is not
seated properly.
Reinsert accessory.
Accessory is
damaged.
Remove and check
accessory. Replace
if not freely
spinning.
Handpiece will not
run.
Handpiece cable is
not firmly plugged
into console.
Ensure handpiece
cable is firmly
plugged into
console.
The electrical cable
is damaged.
Return the
handpiece for
service.
Footswitch electrical
plug is not firmly
seated into console.
Ensure footswitch
plug is firmly seated
into console.
Suction/Irrigation
is not present.
Tubing is not
securely connected
to the suction/
irrigation port.
Ensure tubing is
securely connected.

Stryker Pello Specifications

General

Brand	Stryker
Model	Pello
Category	Measuring Instruments
Language	English