8 www.stryker.com
EN 700000890732 Rev-AE
Instructions
WARNINGS:
• ALWAYS operate the equipment within the specified
environmental condition values. See the Specifications section.
• DO NOT attempt to insert or remove any accessory or
attachment while the handpiece is operating.
• Do not apply excessive pressure, such as bending or prying
with the accessory, or allow to make contact with metal objects.
Excessive pressure or contact with a metal object may cause
the accessory to break or shed metal, leaving pieces of metal
in the wound resulting in tissue damage and injure the patient
and/or the healthcare staff.
To Insert an Accessory
1. Orient the accessory to align the tabs in one of the two desired
positions and insert the accessory into the handpiece. Advance
the accessory until it snaps into place with an audible click.
NOTE: DO NOT depress accessory release button during insertion.
2. To confirm the accessory is fully engaged, ensure the hub
flange is flush with the handpiece.
Click!
To Next Page
Loading...
Need help?
General
