Rev. 2.0
Operations instructions
8
4. Operations instructions
4.1 Before using the unit
Before you begin to use your new shaker oven you must
understand the differences between an automatic shaker and a dialed manual
one. You will produce better re-sults if you understand the technology and
follow the “rules”.
4. 2
The STS 1600 operates in both automatic and manual modes as selected by the user on the PLC
touch screen.
(1) & (2) The automatic
/manual modes control the complete operation of the STS 1600.
(2)The manual mode allows the user manually control the switches of each device function of the
unit
(3) Heating temperature control (actual)
(4) Preheating temperature
controls the front heating plate (actual)
(5) Print linkage engages the front sensor, front vacuum cylinder and shaking device in automatic
mode
(6) Smoke remove switch engages the internal filtration system
(7) Dusting off switch controls the opening and closing of the powder spreader
(8) Shaking off switch controls the on and off functions of the powder shake element
(9) Mesh belt off switch controls the heating of the conveyor belt
(10) Roll on switch controls the functions of the take up reel
To Next Page
Loading...