Why is the green light ON when STS Measuring Instruments system is not attached to a vehicle or drum?
If the green light is ON when the STS Measuring Instruments system is not attached, check for: incorrect installation of lens caps (Red on the left, Green on the right); a missing or damaged isolating washer on the clamp; stainless steel points set at an improper depth and are touching; or a fault/damage in the controller wiring.
Explains how to interpret the STS 300 model number based on its configuration characters.
Outlines installation requirements, including personnel qualifications and applicable codes.
Details mounting hole specifications, optimal height, seal fitting requirements, and torque values.
Details the status of red and green indicator lights and their relation to operational states.
Describes standard and heavy-duty retractable reels, their construction, and applications.
Explains the standard and enhanced Deadman control options and their operational requirements.
Details the clamp stowage plate, its purpose, and material for safe storage.
Lists power supply, operating range, fusing, enclosure type, weight, and certifications for the monitoring system.
Details monitoring circuit resistance, relay ratings, and integrity light functions.
Provides specifications for integrity ground cable, operator cables, and the grounding clamp.
General| Brand | STS |
|---|---|
| Model | 300 Series |
| Category | Touch Panel |
| Language | English |
To Next Page