Studer A812 - Basic Tape Deck Functions; Numeric Keypad

STUDER
AUTOLOCATOR
2.1 Basic tape deck
functions
Key:
E
tI
[lltn^,,].g.[:]
r
FR^nrs
_l
lnrveuY l*lpuv
I
@
F*-j.lPLAil
lllln^,-l.q.l
R,.l
2.2 Numeric
keypad
Function:
Rewind
(Spooling
speed
programmable
in the
tape recorder)
Fast fonrvard
(Spooling
speed
programmable
in the tape recorder)
Library
wind
(l'he
library
wind
speed
selected)
Play in the
foruard
tape direaion
programmed
in the
tape recorder
is
Play in the
reverse tape
direction
The stop function
has
priority
over alltape command keys and
cancels the
loop
mode.
The record
key is only effective
together with the P[-AY key
(and
if at least
one
channel is switched
to READY).
You
can switch from Pl-{Y directly
to RECORD
mode
by
pressing
either
REC only, or REC+PIAY, depending on
the
programming
Record
in reverse tape
direction
(erase
head switched off)
SHUTTLE BAR:
When the SHUTTLE BAR
(key
above the
SHUTTLE
wheel)
is
pressed,
the
preselected
SHUTTLE speed is stored. This function can
be
cancelled by
pressing
this key
again
or by actuating the SHUTTLE wheel.
SHUTTLE wheel: The tape can
be steplessly
spooled
and
positioned
by turning
the wheel in either direction. Center
position
=
STOP.
Key:
r
tr
Functlon:
Keys
for entering addresses
into the
LOCATE POSITION display
(lower
display
field).
Used
for entering negative
addresses
or for addressing negative memory
locations. The
sign can be changed at any time during the address input
procedure.
For addressing
a memory bcaion the sign
must be entered
belore
the
memory number.
Setsthe LOCATE
POSITION display
(lower
display field) to zero.
ED|T|ON: 22. November 1991
El3