Studer D21m User Manual

Studer D21m
I/O System Components
Diagrams
(Nov. 2010, 4
th
Edition)

Studer D21m Specifications

General

Sample Rate	48 kHz
Connectivity	AES/EBU
I/O	Modular, configurable via I/O cards
Frequency Response	20 Hz - 20 kHz
EQ per Channel	4-band parametric EQ
Dynamic Processing per Channel	Compressor, Limiter, Gate, Expander
Fader Type	100mm Motorized

Summary

For Your Own Safety and to Avoid Invalidation of the Warranty

Safety Symbol Guide

To reduce the risk of electric shock, do not remove covers.

Explains the caution symbol for risk of electric shock and no user-serviceable parts.

The lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insulated 'dangerous voltage'

Details the lightning flash symbol indicating dangerous voltage within the enclosure.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions

Explains the exclamation point symbol for important operating and maintenance instructions.

First Aid

In Case of Electric Shock:

Instructions on how to handle electric shock incidents.

If the Person is Unconscious:

Steps to take if the person is unconscious after an electric shock.

General Installation Instructions

B2 Installation Site

Conditions to be met for installing the unit in a suitable location.

B3 Earthing and Power Supply

Information on proper earthing procedures and power supply connection.

Class I Equipment (Mains Operation)

B4 Electromagnetic Compatibility (EMC)

Install the equipment in accordance with the operating instructions.

In the system and in the vicinity where the equipment is installed, use only components

Maintenance / ESD

Maintenance

Electrostatic Discharge during Maintenance and Repair

Precautions for handling ESD sensitive components to prevent damage.

Repair / Disposal

Repair

Safety precautions and procedures for servicing and repairing the equipment.

Declarations of Conformity

Class A Equipment - FCC Notice

FCC compliance statement regarding radio frequency energy and interference.

Caution: Any changes or modifications not expressly approved by the manufacturer

CE Declaration of Conformity

CE declaration confirming product compliance with relevant EU directives and standards.

Appendix 3: Software License

Programs Covered by the Agreement

Right of Use

Disclosure of License Material

D21m System – Diagrams

Analog I/O Cards

Digital I/O Cards

HD Cards