CHARACTERISTICS AND INSTALLATION
GB
3
MBC BATTERY CHARGER SERIES BATTERY CHARGER
The long experience we have in the nautical field has given us the ability to evolve the range of MBC
battery chargers, now called MBC BATTERY CHARGER, with superior performance to those currently on the
market. The high level of performance of the MBC BATTERY CHARGER gives a charge to the batteries which
is both fast and safe.
Other important advantages which the MBC BATTERY CHARGER battery chargers offer, are:
• Three stage IUoU battery charging.
• Multiple outputs in order to charge more groups of batteries (internal battery isolator diodes).
• Charge selector for liquid/gel electrolyte batteries.
• Low residual fluctuation on output (ripple lower than 30 mV RMS).
• Compatible with every kind of generator.
• Short circuit, overloading, output overvoltage and overheating protection.
• Can work in a wide range of ambient temperatures.
INSTALLATION
BEFORE USING THE BATTERY CHARGER CAREFULLY READ THIS USER’S MANUAL. IN CASE OF
DOUBT CONTACT THE “STUDER INNOTEC” SUPPLIER OR AFTER SALES SERVICE DEPARTMENT.
THE BATTERY CHARGERS HAS BEEN DESIGNED FOR FIXED INSTALLATIONS (FOR INDOOR USE
ONLY).
“Studer Innotec” battery chargers have been designed and made for the reasons described in this
user’s manual. The “Studer Innotec” Company does not accept any responsibility for direct or
indirect damage caused by improper use of the equipment, bad installation or by possible errors
occurring in this manual.
THE OPENING OF THE BATTERY CHARGER BY UNAUTHORISED PERSONNEL MAKES THE
WARRANTY VOID.
THE PACKAGE CONTAINS: battery charger - warranty card - user’s manual - cable terminals (to be
used for connection to the output terminals).
To Next Page
Loading...
Need help?
General
