Studer XPC 1400-12 User Manual

STUDER INNOTEC XP-COMPACT
User manual XP-COMPACT V5.1 E
User and installer Manual
Combi Inverter, Battery charger
and Transfersystem
XP-COMPACT XPC 1400-12
XP-COMPACT XPC 2200-24
XP-COMPACT XPC 2200-48
Remote control RCC-01
Temperature sensor CT-35
Solar charge controller XPCxxxx-S
AC cable cover CFC-01
IP-23 top cover C-IP23
STUDER INNOTEC TEL: ++41 (0)27 205 60 80
Rue des Casernes 57 FAX: ++41 (0)27 205 60 88
CH-1950 SION EMAIL : info@studer-innotec.com

Studer XPC 1400-12 Specifications

General

Brand	Studer
Model	XPC 1400-12
Category	Battery Charger
Language	English

Summary

Introduction

2.2 DESCRIPTION OF MAIN FUNCTIONS

Explains core functionalities: inverter, transfer, charger, solar, remote.

Mounting and installing

3.1 Installation place

3.2 Fixing

3.4 Connections

General instructions and guidelines for making electrical connections.

3.4.1 General instructions on connecting

Essential rules for cable connections, conductor sizes, and safety.

3.5 Connecting panel / Front side

Identification and description of front panel terminals.

3.6 Cabling/wiring

Step-by-step process for connecting cables and wiring.

3.6.1 Pre-installation settings

3.6.2 Connection to battery

Detailed steps and safety precautions for connecting the battery.

3.6.3 Connecting the 230Vac-Consumer Appliance (AC OUTPUT)

Connecting the AC output to appliances.

3.6.4 Connecting the 230Vac Input (AC INPUT)

Connecting AC input from mains or generator.

3.6.5 Connecting the Solar modules: SOLAR +/- (Only with solar option)

Connecting solar modules.

Control

4.1 Display and control parameters

Explanation of LEDs and controls on the main unit.

4.2 Display and control parameters on remote control panel (optional)

4.3 Light Emitting Diodes (LED)

Meaning of each LED indicator.

4.4 Push buttons

4.5 Turning Knobs

4.6 The Inverter

Details inverter operation, standby, and overload protection.

4.7 The Battery charger

Explains the battery charging process, cycles, and float charging.

4.8 The Transfer system

Describes the transfer system's function.

4.9 The Solar charge controller (option)

The Remote Control

5.2 Power monitor

5.3 Battery Condition

5.4 Fault indicator

5.5 Remote alarm contact and on/off control

5.6 Manual control of the auxiliary contact

Programming

6.1 Standard setting

6.2 Reset value (default settings)

6.3 Battery voltages and absorption time

6.4 Program the auxiliary contact

6.4.1 Principle

6.4.2 The programming of the Auxiliary Contact is carried out in the following Steps

6.4.3 Example

6.5 Disabling some of the XP-COMPACT functions

6.5.1 Diagram of the different mode

Technical Data