Need help?Do you have a question about the Studer OnAir 1500 and is the answer not in the manual?
General| Output Channels | 8 |
|---|---|
| Networking | Ethernet |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Power Supply | 100-240V AC |
| Type | Digital Mixer |
| Channels | 16 |
| Frame Sizes | 19" |
| Input Channels | 16 |
| Bus System | Stereo, Mono |
| EQ | 4-band EQ per channel |
| Dynamics | Gate, Compressor, Limiter |
| Built-in Effects | Reverb, Delay |
| Digital Connectivity | AES/EBU, S/PDIF |
| Metering | LED metering |
| Audio Processing | 24-bit, 96 kHz |
| Total Harmonic Distortion | <0.01% |
Explains symbols used in the document to highlight hazards and instructions.
Provides guidance on immediate actions to take in case of electric shock.
Covers essential guidelines for installing the unit safely and correctly.
Specifies environmental conditions for proper unit placement and operation.
Explains the importance of proper grounding and power connection for safety.
Details how to navigate and control console functions via the desk interface.
Details the console's audio input/output router and signal flow management.
Describes procedures for backing up and restoring system configurations.
Explains how to automatically configure the console based on installed hardware.
Details the setup and configuration of logical input signals.
Describes the definition and configuration of logical output signals.
Covers managing user accounts, their access rights, and policies.
To Next Page
