Studer PR99 MKIII - Page 12

Konformitatserklarungen /
Declarations of
Conformity
Class
A
Equipment
» FCC Notice
This equipment has been
tested and
found
to
comply with
the
limits
for
a
Class
A digital device,
pursuant
to
Part 15 of
the
FCC
Rules. These
limits
are
designed
to
provide
a
reasonable
protection
against
harmiul interference when the equipment
is operated
in
a
commercial
environment.
This
equipment
generates,
uses,
and can radiate
radio frequency energy and,
if
not
installed and
used
in accordance with the instruction
manual,
may
cause
harmful
interference
to
radio com-
munications. Operation ofthis equipment in
a
residential area
is
likely
to
cause
harmful interference in
which case the user
will
be
required
to
correct the interference
at
his
own
expense.
Caution:
Any
changes or
modifications
not expressly approved by the
manufacturer
could void the user’s authority to operate the
equipment, A Iso
refer
to relevant
information
in this manual.
CE-Konformitatserklarung
Der Hersteller,
Studer Professional Audio
AG,
CH-8105
Regensdorf,
erklart in eigener Verantwortung, dass das
Produkt
Model Revox PR99
Mklll, Tonbandgeriit,
(ah
Serie-Nr.
60948),
auf
das
sich diese
Erklarung bezieht, entsprechend den Be-
stimmungen der
EU-Richtlinien und Erganzungen
•
Elektromagnetische
Vertragliclikeit
(EMV):
89/336/EWG
+
92/31/EWG
+
93/68/EWG
•
Niederspannung:
73/23/EWG
+
93/68/EWG
mit
den
folgenden Normen und
normativen
Dokumenten
ubereinstimmt:
•
Sicherheit:
Schutzklasse
1,
EN
60065:1993
(lEC
65:1985)
•
EMV:
EN 50081-1:1992; EN
50082-1:1992
Regensdorf, 30. Januar
1997
CE Declaration of
Conformity
The manufacturer,
Studer
Professional Audio
AG,
CH-8105
Regensdorf,
declares under
his
sole
responsibility
that the product
Model Revox
PR99 Mklll,
Tape
Recorder,
(on from serial
No.
60948),
to
which this declaration relates, according
to
following
regulations of EU directives and amendments
•
Electromagnetic Compatibility (EMC):
89/336/EEC
+
92/31/EEC
+
93/68/EEC
•
Low
Voltage (LVD):
73/23/EEC
+
93/68/EEC
is
in conformity
with the
following
standards or other
norma-
tive
documents:
•
Safety:
Class
1,
EN
60065:1993 (lEC
65:1985)
•
EMC:
EN 50081-1:1992; EN
50082-1:1992
Regensdorf, January
30,
1997
P. Fiala, Manager QA
X