Studer Innotec SA
VarioString
30 V 2.3 User manual
When no other value than the one initially displayed in the field is selected, ESC key validates the
initial choice.
The four fields can be scrolled and modified any time to display four of the values indicated in the
table below. Some parameters are not available depend the model.
Battery cycle phase (Bulk, Absorpt., Equalize, Floating, ---, ---,
R.float., Per.abs., ---, ---, ---, ---)
PV type of wiring (Unknown, Independ., Series, Parallel, Error)
PV operating mode (Night, Security, OFF, Charge, ChargeV,
Charge I, ChargeP, ChargeIpv, ChargeT, ---, Ch.Ibsp)
PV1 operating mode (Night, Security, OFF, Charge, ChargeV,
Charge I, ChargeP, ChargeIpv, ChargeT, ---, Ch.Ibsp)
PV2 operating mode (Night, Security, OFF, Charge, ChargeV,
Charge I, ChargeP, ChargeIpv, ChargeT, ---, Ch.Ibsp)
Production PV in (Ah) for the current day
Production PV in (kWh) for the current day
Production PV1 in (kWh) for the current day
Production PV2 in (kWh) for the current day
Produced PV energy resettable counter
Produced PV1 energy resettable counter
Produced PV2 energy resettable counter
Total PV1 produced energy
Total PV2 produced energy
Production PV in (Ah) for the previous day
Production PV in (Wh) for the previous day
Production PV1 in (Wh) for the previous day
Production PV2 in (Wh) for the previous day
Number of irradiation hours for the current day
Number of irradiation hours for the previous day
Max PV voltage for the current day
Max PV1 voltage for the current day
Max PV2 voltage for the current day
Max battery current of the current day
Max PV power for the current day
Max PV1 power for the current day
Max PV2 power for the current day
Max battery voltage for the current day
Min battery voltage for the current day
To Next Page
Loading...