Need help?Do you have a question about the STUDIO PROJECTS B3 and is the answer not in the manual?
Key care instructions include keeping the microphone dry, avoiding air blasts on the capsule, and preventing shaking.
Troubleshoot mic clip fit issue by using a dime or quarter to unscrew the brass insert.
Adjust mic clip tension by tightening silver screws under round plastic covers.
Technical specifications for the Studio Projects B1 microphone, including sensitivity, polar pattern, and frequency response.
Technical specifications for the Studio Projects B3 microphone, including sensitivity, polar pattern, and frequency response.
Technical specifications for the Studio Projects TB1 microphone, including type, sensitivity, and max SPL.
Conditions for warranty service, including notification, exclusive remedy, exceptions, and proof of purchase requirements.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 200 ohms |
| Connector | XLR |
| Power Requirements | 48V Phantom Power |
To Next Page