It allows you to select two options:
TONEWHEEL which corresponds to the typical sound of vintage B3-type models.
ELEKTRO less sinusoidal sound, similar to the Principals or Diapasons of classical organs as they
were made in electronic simulations, also suitable for reproducing the timbres of the non-
electromechanical Electronic Organs of the 60s and 70s thanks to the control of the Drawbars,
Percussions, Leakage and Rotary.
Tube-like distortion with control from 00 to 127, exclusively applied to Rotary. It is important to
note that the distortion, unlike what happens for the DRIVE of FX-A, does not change with the
volume of the section or with the Expression pedal and remains adjusted as per parameter, to add
a fixed tube effect to the Rotary simulation.
CLOSE/FAR simulates a position of the microphones close or far from the original cabinet, which
affects the depth and spatialization of the modulation. By selecting CLOSE, the modulation
amplitude is maximum, while on FAR it is reduced, as occurs by moving the real microphones
MONO equals just 2 microphones placed at the top and bottom of the cabinet.
STEREO is equivalent to 4 microphones positioned two at the top and two at the bottom
By selecting the MONO setting, we recommend choosing the Mic Postion FAR to prevent the
modulation from being excessively deep and also to simulate the typical sound of amplifications
generally used in live performances, while the STEREO settings are mainly used in studio
Rotary speeds can now also be selected from PED2. Manually assignable in EDIT MENU or
automatically with FX Autoset active. FX Autoset switches the function of PED2 according to the
selected SOUND and relative FOCUS of the ZONE.
If the focus is on one of the parts and you are in SOUND mode (with the SOUND button selected
and lighted) you will enter in the PART edit mode. When you have selected PART edit you can
User manual - Numa Compact X SE https://www.studiologic-music.com/support/articles/ncxse_manual/?l...
23 di 32 01/03/2024, 13:41
To Next Page
Loading...
