Expression / Universal pedals
Connect the (optional) pedal or pedals to the related sockets, labelled Ped1 and Ped2; at the socket
labelled PED1 you can plug in the Studiologic FP/50 or VP/27 pedal, typically for volume-
expression controls. To the PED2 socket you can plug either a single swicth pedal, a volume-
expression pedal or the custom triple pedal SLP3-D, as explained in the related chapter.
If you want to use external amplification systems, or record the instruments sounds, connect the
Left and Right audio outputs to the inputs of your mixing desk or amplifier, or to your computer
audio board inputs, using suitable cables.
The Headphones output can be used with an headphones set or as an extra audio auxiliary output,
according to the setting of the related GLOBAL edit function (explained in this manual). As an
auxiliary audio out, you can use this plug to connect the instrument to a subwoofer or an additional
amplification system, while the L/R outputs are still available for recording or other audio
When you use the Numa Compact for the first time, we recommend you to turn the Volume knob
on the Output section to not more than half way between 0 and Full. While you are playing you can
adjust the volume according to the selected sounds. Adjusting the Volume knob will effect all audio
and headphone outputs at the same time.
To prevent hearing damage, you should – as with all audio devices – avoid using the Numa
Compact at high volume for long periods.
For data transmission via USB, connect the Numa Compact to your computer with a USB cable.
The first time you switch the Numa Compact on, it will be recognised by your computer
automatically and the appropriate driver will be installed by the OS (cross compliant).
The USB also supports the transmission of digital audio.
User manual - Numa Compact X SE https://www.studiologic-music.com/support/articles/ncxse_manual/?l...
4 di 32 01/03/2024, 13:41
To Next Page
Loading...
