28
This parameter enables or disables the aftertouch function on
the selected Zone; the function of the Aftertouch will be in
most cases similar-same of the Stick 2 modulation control, ad-
ding some kind of vibrato or similar modulation to the sound,
according to the setting. Normally you will set the Aftertouch
ON for the UPPER zone, that is commonly used for the main
musical zone or solo performances, while the LOWER zone is
normally associated to accompaniments or bass lines, if the
SPLIT is active, however the setting is totally under your con-
trol and choice.
MIDI (Zone edit)
AFTERTOUCH
To Next Page
Loading...
