7. Product Care Instructions.
For Safe and Efficient Operation
Select the installation location of your unit carefully.
Avoid placing it in direct sunlight.
Avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep away from sources of hum such as
transformers or motors.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
The MAINS plug is used as the disconnected device, the disconnect device shall remain readily operable.
WARNING:
- Do not open the cabinet as this might result in damage to the set or electrical shock.
- Be sure your hands are clean when handing discs. Never insert a disc which has a crack on its surface.
- When disconnecting the power cord form the AC outlet, always grasp it by the plug. Never pull the cord.
- Do not use force when operating the switches and knobs.
- Before moving the set, be sure to disconnect the power cord and all connecting cables.
- Do not place this unit on an unstable surface as it may affect system performance.
- To keep the laser pickup clean, do not forget to close the disc tray.
- Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.
- Do not attempt to repair the unit yourself, for repairs please get in touch with Dealer/Distributor.
- Keep this manual in a safe place for future reference.
7
The user shall not place this apparatus in the confined area during he operation so that the mains switch can be
easily accessible
To Next Page
Loading...