Need help?Do you have a question about the Studiomaster Powerhouse 300 and is the answer not in the manual?
Provides a general overview of the Studiomaster POWERHOUSE consoles and their versatility.
Details on plug wiring, voltage selection, and earthing for safe AC power connection.
Instructions on proper ventilation and protecting loudspeakers during operation.
Details the MIC/LINE inputs, GAIN, EQ, SENDs, PAN, CLIP, L-R/GRAPHIC, and FADER controls.
Describes DIGITAL REVERB, POWER ON, LED METERS, GRAPHIC EQUALISER, and various FADERS/SENDs.
Identifies AC power inputs, inserts, outputs, and cooling fan on the rear panel.
Guides through initial console setup, connecting sources, and routing to headphones.
Explains the use of equalisation and controls for REV, AUX, and MON effect sends.
Details on mixing effects and setting up the MON system for performers.
Covers graphic EQs, tape I/O, phantom power, and understanding MON system features.
Options for routing the main stereo mix to different outputs.
Explains the TYPE, BANK SELECT, and TIME buttons for selecting and adjusting reverb effects.
Presents technical data on reverb times, special effects, and practical usage advice.
Lists the technical performance specifications for the built-in digital reverb unit.
Provides detailed technical specifications for the overall mixing console.
Details technical specs for the amplifier, graphic equalisers, and other system components.
Information on the console's physical size and weight.
Definitions for common audio signal processing terms like Attenuate, Compressor, and Feedback.
Definitions for terms related to signal levels, routing, and controls like Gain, Pan, and Pre/Post.
Provides a general overview of the Studiomaster POWERHOUSE consoles and their versatility.
Details on plug wiring, voltage selection, and earthing for safe AC power connection.
Instructions on proper ventilation and protecting loudspeakers during operation.
Details the MIC/LINE inputs, GAIN, EQ, SENDs, PAN, CLIP, L-R/GRAPHIC, and FADER controls.
Describes DIGITAL REVERB, POWER ON, LED METERS, GRAPHIC EQUALISER, and various FADERS/SENDs.
Identifies AC power inputs, inserts, outputs, and cooling fan on the rear panel.
Guides through initial console setup, connecting sources, and routing to headphones.
Explains the use of equalisation and controls for REV, AUX, and MON effect sends.
Details on mixing effects and setting up the MON system for performers.
Covers graphic EQs, tape I/O, phantom power, and understanding MON system features.
Options for routing the main stereo mix to different outputs.
Explains the TYPE, BANK SELECT, and TIME buttons for selecting and adjusting reverb effects.
Presents technical data on reverb times, special effects, and practical usage advice.
Lists the technical performance specifications for the built-in digital reverb unit.
Provides detailed technical specifications for the overall mixing console.
Details technical specs for the amplifier, graphic equalisers, and other system components.
Information on the console's physical size and weight.
Definitions for common audio signal processing terms like Attenuate, Compressor, and Feedback.
Definitions for terms related to signal levels, routing, and controls like Gain, Pan, and Pre/Post.
General| Brand | Studiomaster |
|---|---|
| Model | Powerhouse 300 |
| Category | Music Mixer |
| Language | English |
To Next Page
