Sturtevant Richmont Torq-Tronics 150

Need help?

Do you have a question about the Sturtevant Richmont Torq-Tronics 150 and is the answer not in the manual?

Summary

Safety Recommendations

General Safety Precautions

General safety precautions and warnings for operating the Torq-Tronics® unit.

Specific Hazard Warnings

Warnings regarding electrical shock and tripping hazards.

Chapter 1 - Features

Key Controls and Functions

Peak Select and Filter Key Operation

Transducer and Power Components

Chapter 2 - Installing Your Torq-Tronics

Location Selection Criteria

Factors to consider for mounting the tester: proximity, solidity, power, orientation.

Mounting and Electrical Connection

Computer Communications Setup

Installation Testing Procedures

Chapter 3 - Testing Torque Wrenches & Manual Torque Screwdrivers

Starting the Torq-Tronics for Testing

Preparing and Testing Torque Wrenches

Ensuring suitability and performing the torque wrench test procedure.

Chapter 5 - Joint Simulators and Power Tool Testing

Understanding Joint Hardness

Joint Simulators Explained and Assembled

Rotation Measurement and Washer Configuration

Chapter 6 - Filters

Filter Purpose and Function

Filtering Concept and Application

Chapter 7 - Testing Power Tools of Under 10 Inch-Pound Capacity

Gathering Joint Information

Measuring actual joint torque to select the correct filter.

Preparing and Testing Low-Capacity Tools

Setup and procedure for testing tools under 10 inch-pounds.

Chapter 8 - Testing Non-Shutoff Pulse Tools

Non-Shutoff Pulse Tool Testing Overview

Procedures for testing tools with no automatic shutoff.

Testing the Non-Shutoff Tool

Steps for testing and evaluating non-shutoff pulse tools.

Chapter 9 - Testing Power Tools Over 10 Inch-Pound Capacity

Procedure for High-Capacity Tool Testing

Testing tools over 10 inch-pounds using joint simulators.

Joint Measurement and Result Comparison

Chapter 10 - Calibration

Calibration Procedure Steps

Detailed steps for calibrating the Torq-Tronics® unit using weights.

Calibration Verification Procedure

Steps to confirm the accuracy of the calibration performed.