EasyManua.ls Logo

Stuv 21/125 DF - Presentation of the Product; Standards, Certification and Technical Characteristics

Stuv 21/125 DF
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
SN 34245 - 132149
Stûv 21 - installation [en] - 06-2014
Standards, certification and technical characteristics
The Stûv 21 stoves (for intermittent
operation) comply with the
requirements of EN European
Standards in terms of efficiency,
gas emissions, safety etc….
Data provided in this notice are
supplied by a certified laboratory.
Test results according to
EN13229 : 2001 and
13229–A2 :2004 standards
(built-in stoves)
PRESENTATION OF THE PRODUCT
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
12 QA 121322912
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 21/125 SF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– behind : 11cm
– on the sides : 15cm
– below : 0cm
– above : 10cm
Recommended fuel : wood logs only
CO emissions : < 0.12%
Average smoke temperature
at rated power : 323°C
Nominal heat power : 21kW
Efficiency : 76%
Particle emissions : 22mg/Nm
3
Please read the installation
instructions and directions for use !
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
14 QA 141322914
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 21/135 SF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– behind : 17cm
– on the sides : 15cm
– below : 0cm
– above : 20cm
Recommended fuel : wood logs only
CO emissions : < 0.10%
Average smoke temperature
at rated power : 329°C
Nominal heat power : 20kW
Efficiency : 76%
Particle emissions : 64mg/Nm
3
Please read the installation
instructions and directions for use !
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
07 QA 071322904
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 21/125 DF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– on the sides : 13cm
– below : 1cm
– above : 13cm
Recommended fuel : wood logs only
CO emissions : < 0.30%
Average smoke temperature
at rated power : 251°C
Nominal heat power : 27kW
Efficiency : 72%
Particle emissions : 31mg/Nm
3
Please read the installation
instructions and directions for use !

Related product manuals