EasyManua.ls Logo

Stuv 21 - Fresh Air Supply; Air Inlet Requirements by Model

Stuv 21
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
SN 34245 - 132149
Stûv 21 - directions for use [en] - 0118
Bois-de-Villers, 2018
Gérard Pitance Jean-François Sidler
Stûv 21 - 135 SF
Stûv s.a
Rue Jules Borbouse, 4 B-5170 Bois-de-Villers
Tel.: +32(0)81.43.47.96 - Fax: +32(0)81.43.48.74
info@stuv.com www.stuv.com
Declaration of performance
EU 305/2011
Fitted device or open fi re without a hot water supply
complying with the EN 13229: 2001 / A2: 2004 standard
Recommended fuel: wooden logs only
Manufactured by:
Approved certifying body:
System to assess and check the consistency of performance: 3
Test report number: 2014/0040
Document number: 14 QA 141322914-EN
2013 - Laboratory KVBV - ARGB
Rodestraat 125 B-1630 Linkebeek
This device complies with CE regulations
European standards EN 13229:2001/A2:2004/AC:2007
Main features Performance
CO emissions 0,08 %
Smoke temperature at nominal power 329 °C
Heating power Nominal:
Distributed in the room:
Distributed in water:
20 kW
20 kW
- kW
Output
76 %
Maximum water pressure when operating -
Surface temperature Pass
Surface temperature Pass
Electrical safety Pass
Mechanical resistance (for the pipe to withstand) NPD
Fire safety
Reaction to fi re A1
Minimum distances in relation
to combustible materials
Rear insulation thickness
Side insulation thickness
Top insulation thickness
Front insulation thickness
Insulation thickness in relation to the fl oor
170 mm
150 mm
200 mm
800 mm
0 mm
Fire risk after burning fuel has fallen Pass
Chief Executive and Founder Managing Director and Chief Executive
PERFORMANCE DECLARATION (EU305/2011)

Other manuals for Stuv 21

Related product manuals