HARDWARE CONTENTS (shown actual size)
Spacer
Qty. 3
3
IS2265
PREPARATION
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Before cutting, drilling or hammering into any wall surface, verify the location of electrical,
plumbing and gas lines. Cutting any of these may cause serious injury. If needed, contact
your electrician, plumber or service person.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 25 minutes (with assistance of another person)
Tools Required for Assembly (not included): Tape Measure
AA
Small End Cap
Qty. 1
Large End Cap
Qty. 1
Wedge
Qty. 4
Transition Ring
Qty. 1
Spring Stopper
Qty. 2
Tape Strip
Qty. 1
BB CC
DD
EE FF
GG
To Next Page
Loading...