To Next PageTo Next Page
Need help?Do you have a question about the Style selections AD97834 and is the answer not in the manual?
Align and lower the top with tubing (B) onto the fountain (A) for proper water flow.
Attach tubing to pump (C) and place the pump inside the fountain reservoir via the rear access hole.
Route the 2 to 1 connector (E) out the rear and connect it to the transformer (F).
Create a drip loop for light cords, fill reservoir to submerge pump (C), and install pump access door (G).
Connect the power cords into an electrical socket to run the fountain.
Guidelines for plugging in the pump, priming, submerging, and cleaning for optimal performance and longevity.
Instructions for storing the product indoors in harsh weather conditions and draining the pump.
Diagnoses common causes like no power, low water, blockages, or air locks, and provides corrective actions.
Details coverage for paint finish peeling and fading, excluding submerged areas.
Covers loss of shape or severe cracking from outdoor exposure, excluding minor hairline cracks.
Lists conditions that void the warranty, including freezing damage, water damage from cleaners, misuse, and accidents.
General| Brand | Style selections |
|---|---|
| Model | AD97834 |
| Category | Outdoor Fountain |
| Language | English |
