EasyManua.ls Logo

Style selections EST-330-80 - User Manual

Style selections EST-330-80
42 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
ITEM #0386386
PANORAMIC
ELECTRIC STOVE
MODEL #EST-330-80
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. – 8 p.m., EST, Monday - Friday.
C US
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY,
AN ELECTRICAL SHOCK OR FIRE MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
IMPORTANT INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE
ATTACH YOUR RECEIPT HERE
Serial Number ________________________________ Purchase Date _________________________________
20-10-134
REV. 3/2012
Patent pending
Style Selections® is a registered trademark of LF,
LLC. All Rights Reserved
Francais p. 15
Español p. 29

Table of Contents

Questions and Answers

  • S
    Sara NavarroAug 11, 2025
    Why is my Style selections EST-330-80 Stove not operating?
    • D
      Diana BellAug 12, 2025
      Your Style Selections Stove might not be operating due to several reasons. First, ensure the stove is properly plugged into a standard 120-volt outlet. Also, check the circuit breaker or fuse; it may have tripped or blown. Ideally, the stove should be on a dedicated 15-amp circuit. If these steps don't resolve the issue, there may be a defective ON/OFF switch or loose wiring, which requires professional assistance.
  • T
    Thomas BellAug 18, 2025
    What to do if the Style Selections Stove heater is not operating?
    • J
      Jasmine GreenAug 18, 2025
      If the heater on your Style Selections Stove isn't working, first refer to the operating instructions to ensure correct operation. Another possible cause is dirty or clogged vents. To resolve this, unplug the unit, clear the vent area of any dust and debris, wait ten minutes, then plug the unit back in and turn on the heater. If the issue persists, it could be due to a defective heater switch, a defective heater assembly, or loose wiring, all of which require professional attention.
  • M
    Mark SanchezAug 27, 2025
    Why is the flame effect not visible on my Style selections EST-330-80, even though the power light is on?
    • G
      Gary JohnsonAug 27, 2025
      If the power light is on but the flame effect isn't visible on your Style Selections Stove, first, make sure you are operating it correctly by referring to the operating instructions. Also, check the light bulbs; they may be loose or burnt out. Try tightening them first, and if that doesn't work, replace them.
  • D
    Daniel KimSep 2, 2025
    Why is my Style selections EST-330-80 Stove heater making excessive noise?
    • B
      Brandi MooreSep 2, 2025
      Excessive noise from the heater in your Style Selections Stove can indicate a defective fan or heater assembly, which requires professional assistance.

Style selections EST-330-80 Specifications

General IconGeneral
BrandStyle selections
ModelEST-330-80
CategoryStove
LanguageEnglish