Style selections Lana LWSODS

Need help?

Do you have a question about the Style selections Lana LWSODS and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the assembly, usage, and maintenance of an "OPEN DRAWER STORAGE" unit, Model #LWSODS, Item #5120853, from Style Selections.

Function Description:

The device is an open drawer storage unit designed for organizing items. It features multiple drawers for storage and is intended for use in various home or office settings. The unit is designed to be stable and can also be stacked with additional units (sold separately) to create a taller storage solution, functioning as a hutch. Wall anchoring is recommended for stability, especially when stacking units.

Important Technical Specifications:

Maximum Load: Each drawer has a maximum load capacity of 30 lbs (13.6 kg). It is crucial to distribute weight evenly to prevent instability and potential injury.
Dimensions (implied by parts list): While specific overall dimensions are not provided, the parts list indicates the presence of a top panel, bottom panel, left and right side panels, a back panel, back and front stretchers, and components for four drawers (drawer back, drawer left, drawer right, drawer bottom, drawer front).
Assembly Time: The estimated assembly time is 50 minutes.
Tools Required (not included): Rubber mallet, Phillips screwdriver.
Hardware Components: The unit utilizes a variety of hardware, including:
- Cam Locks (AA, LL)
- Cam Bolts (BB)
- Wood Dowels (CC)
- M4 x 50 mm Screws (DD)
- Metal Plates (EE)
- M3.5 x 15 mm Screws (FF)
- Floor Levelers (GG)
- Caps (HH)
- Plastic Covers (II)
- M3.5 x 19 mm Screws (JJ)
- M4 x 38 mm Screws (KK)
- Drywall Anchor (MM)
- Back Crosser (NN)
- M5 x 65 mm Screw (OO)
Material (implied): The mention of "wood" in maintenance instructions suggests the unit is made of wood or wood-based materials.

Usage Features:

Drawer System: The unit incorporates a ball-bearing slide track system for smooth drawer operation. To install a drawer, extend the ball-bearing slide tracks fully, align the drawer's slide runners with the tracks, and push the drawer in until it stops. If a drawer does not slide smoothly, it should be removed and re-inserted. To remove a drawer, pull it out completely, then simultaneously push the plastic release levers (one up, one down) on the ball-bearing slides and pull the drawer out.
Leveling: Floor levelers (GG) are included to adjust the unit's stability and level it against a wall or on uneven surfaces.
Wall Anchoring: The unit is designed to be anchored to a wall for enhanced stability, especially when stacked. This involves using the back stretcher (E) as a template to mark mounting holes, drilling pilot holes, inserting drywall anchors (MM) (if not drilling into a wooden stud), and securing the back stretcher (E) and back crossers (NN) with M5 x 65 mm screws (OO). Plastic covers (II) are provided to conceal the cam locks.
Stacking Capability: The unit can be stacked with additional units (sold separately). When stacking, wood dowels (CC) are inserted into the top of the base unit, the bottom of the second unit is placed onto these dowels, and metal plates (EE) are attached with M3.5 x 19 mm screws (JJ) to secure the units together. Caps (HH) should be removed from the top panel before stacking and re-inserted into the top panel of the uppermost unit after stacking. If used as a hutch (stacked on another unit), steps 9 (inserting floor levelers) and 13 (inserting caps into the top panel) should be skipped for the base unit.

Maintenance Features:

Regular Checks: Periodically check all components to ensure they are properly positioned, free from damage, and firmly connected. Regularly check and tighten all bolts and screws.
Cleaning:
- Use a soft, clean cloth that will not scratch the surface when dusting.
- Never use water to clean the furniture, as it may damage the finish.
- Wipe clean with a damp cloth and a mild cleaner, then wipe dry with a clean cloth.
- For stains or damage, professional repair is recommended.
Environmental Care:
- Keep the furniture away from direct sunlight to prevent damage to the finish.
- Store the furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking, and splitting of wood.
Warranty: The product comes with a limited lifetime warranty covering defects in materials or workmanship. The manufacturer will repair or replace the item at its discretion. The warranty is void if the product is assembled incorrectly, misused, abused by overloading, altered, or damaged due to accident. It does not cover chipping, flaking, scratches, rust, dents, or other surface damages. The manufacturer's responsibility is limited to repair or replacement of the product and does not cover consequential, incidental, or other damages or losses resulting from product failure.