To Next PageTo Next Page
Need help?Do you have a question about the StyleCrest Revolv VMA3-50D36N and is the answer not in the manual?
Step-by-step guide for safe furnace operation and potential gas leak procedures.
Key responsibilities and safety precautions for homeowners regarding furnace maintenance and operation.
Immediate actions to take if a gas leak is detected, emphasizing safety and contact procedures.
Warning against flammable liquids and ensuring the compartment is closed during operation.
Detailed technical specifications for VMA3 and VMC1 furnace models, including input, output, and orifices.
Lists specific parts included in installation packages for different furnace models.
Information on blower motor specifications and performance data for various speeds.
Covers BTU capacity, gas conversion, temperature rise, and compliance with codes.
Specifies required clearances for closet and alcove installations based on material type.
Guidelines for selecting furnace location and installing bases for VMA3 models.
Specifies minimum clearances for alcove and closet installations, including return air openings.
Procedures and safety warnings for sizing and installing fuel gas piping.
Rules for installing the vent and air intake system, including pipe size and terminations.
Details on connecting the condensate drain trap and optional neutralizer or pump.
Flowchart detailing the step-by-step process of furnace ignition and operation.
Pre-start checks and operating instructions for initial furnace startup.
Procedures for checking and adjusting BTU input rate and burner flame characteristics.
How to set temperature rise and perform a furnace checkout after installation.
Installer's responsibility to inform the homeowner about manual location, controls, and operation.
Checks for wiring integrity, voltage, amp-draw, and vent pipe condition.
Inspecting condensate line, burners, inducer blower, gaskets, and heat exchanger.
Cleaning coil air side, house air blower, and servicing the return air filter.
Explains the integrated ignition control and LED flashing codes for diagnosing failures.
A step-by-step diagnostic flowchart to help identify and resolve furnace malfunctions.
Describes conditions that lead to system lockout and how to reset or resolve them.
General| Model Number | VMA3-50D36N |
|---|---|
| Category | Furnace |
| Manufacturer | StyleCrest |
| Series | Revolv |
| Frequency | 60 Hz |
| BTU | 50, 000 BTU |
