EasyManua.ls Logo

Suaoki PF3 - Speed Measurement Mode; Battery Installation

Suaoki PF3
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
· 7 ·
Battery Installation
E. Speed Measurement Mode
“ α ” must be less than 10°. The smaller the angle, the higher the accuracy.
Short press . Move the target sign along with the object being measured. The speed
of the movement can be measured accordingly.
* Speed measurement range: 18~300km/h
Km/h
α
Direction of motion
Please use 1 x CR2 battery to power on the device.
When (Low battery) is displayed, pls replace the battery in time, otherwise the
distance error will increase; Please take off the battery if it is not used for long time.
1. Pull up the rotary handle on battery cover (photo 1) and rotate it anti-clockwise until the
battery cover is opened (photo 2).