What to do if Suaoki S200 shows E27 error?
If your Suaoki Portable Generator displays error code E27, it indicates a total output power overload protection. To resolve this, simply reduce the load power being drawn from the generator.
What to do if Suaoki Portable Generator displays E12 error?
If your Suaoki Portable Generator shows an E12 error, it means the inverter has over-current protection activated. You should check the AC output port for any overloads or short circuits.
What does E13 error mean on Suaoki S200 Portable Generator?
If your Suaoki Portable Generator displays error code E13, this indicates that the inverter has overload protection enabled. Please check the AC output to ensure it is not overloaded, referring to the ‘Product Specifications’ section for overload capacity.
What does error E14 mean on Suaoki S200?
If your Suaoki Portable Generator displays error code E14, it means the inverter has short-circuit protection activated. Check the AC output port for any overloads or short circuits.
What does E21 error mean on Suaoki Portable Generator?
If your Suaoki Portable Generator displays error code E21, it indicates a 12V10A output over-current protection. Check the output port for any overloads or short-circuits.
What does error code E22 mean on Suaoki S200?
If your Suaoki Portable Generator displays error code E22, it means the 12V10A output has overload protection activated. Check the output port for any overloads or short-circuits.
What does E02 error mean on Suaoki S200 Portable Generator?
If your Suaoki Portable Generator displays error code E02, it means the battery has over-voltage protection activated. Disconnect the product from the power source to stop charging and then restart it.
What does error E16 mean on Suaoki S200?
If your Suaoki Portable Generator displays error code E16, it indicates charging over-voltage protection. Verify that the input voltage does not exceed the maximum input voltage.
What does E11 error mean on Suaoki Portable Generator?
If your Suaoki Portable Generator displays error code E11, it indicates battery low-voltage protection. To resolve this, charge the product promptly and restart it once fully charged.
What does E10 error mean on Suaoki Portable Generator?
If your Suaoki Portable Generator displays error code E10, it indicates SOC (state of charge) protection. Charge the product in time and restart it after it is fully charged.
Safety precautions and guidelines for using the product.
Protection mechanisms for charging and discharging in cold weather.
Recommendations for storing and maintaining the product.
List of items included in the product package.
Detailed explanation of the product's LCD screen and its components.
Explanation of the functions of the power, DC, and AC buttons.
Methods and steps for charging the portable power generator.
Guide to selecting between 50Hz and 60Hz output frequencies.
Common error codes and their corresponding solutions.
Detailed technical specifications of the power generator.
Details about the product warranty period and terms.
How to contact customer support for inquiries or comments.
General| Battery Capacity | 222Wh |
|---|---|
| Battery Type | Lithium-ion |
| Charging Methods | AC Adapter, Solar Panel, Car Charger |
| Recharge Time (AC Adapter) | 5-6 hours |
| USB Output | 2 USB ports |
| Output Ports | 1x AC, 1x DC, 2x USB |
To Next Page
