Sub-Zero 200 Series Installation Guide

Before you begin your installation of a Sub-Zero 200 Series
unit, there are a few things you should take special care to
observe. By reading these introductory instructions careful-
ly, you will make the installation procedure easier, problem-
free and, most important, safe.
First, as you follow these installation instructions, take par-
ticular note of the WARNING! and CAUTION! symbols
when they appear. This information is important for the safe
and efficient installation of this Sub-Zero.
Also, The printed instructions may signal an IMPORTANT
NOTE, which highlights information that is especially
important for a problem-free installation.
3
Second, make sure that the actual equipment that was
shipped to you matches the design you are expecting to
install. Sub-Zero 200 Series offers models 249R, 249RP,
249FF and 245.
Each of these design options has specific installation
requirements, which means it is vital that the unit match
your planning and space needs. Before you begin, check the
exact model number you need against the model numbers
on the shipping carton.
If the unit you receive does not match your requirements,
contact your Sub-Zero dealer.
WARNING
alerts you to a hazard that may cause serious injury or
death if precautions are not followed.
CAUTION
signals a hazard where minor injury or product damage
may occur if you do not follow instructions.
200
SERIES
INSTALLATION GUIDE
200 IG 3758400 1-04.qxd 1/2/2004 7:55 AM Page 3

Sub-Zero 200 Series Specifications

General

Brand	Sub-Zero
Model	200 Series
Category	Refrigerator
Language	English