Sub-Zero 601F Brochure & Specs

BUILT-IN REFRIGERATION
21
PARTIAL FRAMED DOOR PANEL OPTION
Ice | Water Dispensing Framed (F) Models
Model 685 W H
Refrigerator Partial Framed Panel 15
5
/8" (397) 67
11
/16" (1719)
Freezer Partial Framed Panel 15
5
/8" (397) 67
11
/16" (1719)
Model 695 W H
Refrigerator Partial Framed Panel 17
15
/16" (456) 67
11
/16" (1719)
Freezer Partial Framed Panel 17
15
/16" (456) 67
11
/16" (1719)
The partial framed accessory kit (FRAMPAR) is required for this option.
Kit includes partial framed molding and classic stainless steel inset
handle panels for above and below glasswell on the refrigerator door.
PANEL GRILLE OPTION
Framed (F) Models
Models 611 and 611G W
Grille Panel Width 28
3
/16" (716)
Models 650, 650G, 661 W
Grille Panel Width 34
3
/16" (868)
Models 642 and 685 W
Grille Panel Width 40
3
/16" (1021)
Models 632 and 695 W
Grille Panel Width 46
3
/16" (1173)
10" (254) Grille H
Grille Panel Height 8
15
/16" (227)
11" (279) Grille
(standard) H
Grille Panel Height 9
15
/16" (252)
12" (305) Grille Height H
Grille Panel Height 10
15
/16" (278)
13" (330) Grille H
Grille Panel Height 11
15
/16" (303)
14" (356) Grille H
Grille Panel Height 12
15
/16" (329)
15" (381) Grille H
Grille Panel Height 13
15
/16" (354)
For panel grille insert size, use width dimension listed
for your model and height dimension for grille option.
11" (279) grille is standard.
FRAMED DOOR PANEL SPECIFICATIONS
Side-by-Side Framed (F) Models
Model 661 W H
Refrigerator Framed Panel 19
1
/8" (486) 67
11
/16" (1719)
Freezer Framed Panel 14
5
/8" (371) 67
11
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Model 642 W H
Refrigerator Framed Panel 24" (610) 67
11
/16" (1719)
Freezer Framed Panel 15
5
/8" (397) 67
11
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Model 685 W H
Refrigerator Framed Panel 24" (610) 67
11
/16" (1719)
Freezer Framed Panel 15
5
/8" (397) 67
11
/16" (1719)
Glasswell Cut-Out Dimensions 5
7
/8" (150) 12
7
/16" (315)
Glasswell Location (Refrigerator) E) 1
9
/16" (39) F) 28
9
/16" (726)
Model 632 W H
Refrigerator Framed Panel 27
11
/16" (703) 67
11
/16" (1719)
Freezer Framed Panel 17
15
/16" (456) 67
11
/16" (1719)
Raised Panel Handle Recess Location –
Refrigerator | Freezer Panel A) 38
5
/32" (969)
Model 695 W H
Refrigerator Framed Panel 27
11
/16" (703) 67
11
/16" (1719)
Freezer Framed Panel 17
15
/16" (456) 67
11
/16" (1719)
Glasswell Cut-Out Dimensions 5
7
/8" (150) 12
7
/16" (315)
Glasswell Location (Refrigerator) E) 1
9
/16" (39) F) 28
9
/16" (726)
IMPORTANT NOTE: Panel specifications are for Built-In framed (F)
models. Panel specifications for overlay models are on pages 24–25.
For Models 685 and 695, panel thickness in the glasswell area can
range from
1
/ 4 " (6) to a maximum of 1
1
/ 8 " (29). If the panel is thicker,
you must rout out a minimum
1
/ 4 " (6) flat landing area to accommo-
date the bezel surrounding the glasswell.
Models 661, 642
and 632
WW WW
H
14" (356)
WW
H
A
H
F
E
Models 685 and 695 Models 685 and 695
Partial Framed Option
FRAMED PANELS
To install framed
panels, see the
detailed procedures
outlined in the
Sub-Zero Built-In
Installation
Instructions.

Sub-Zero 601F Specifications

General

Type	Freezer
Energy Star	Yes
Defrost Type	Automatic
Installation Type	Built-In
Ice Maker	Yes
Water Dispenser	No
Width	30 inches
Height	84 inches
Depth	24 inches
Finish	Panel Ready