MODEL DESCRIPTIONS
The diagram below (See Figure 1-2) explains the full model number code of the Built-in Series. The tables starting
on the following page list the basic model numbers, which are all the digits up to the letter after the first forward
slash, and are accompanied by diagrams of the basic models.
NOTE: Functional parts are common to each model configuration, meaning for example, models BI-36UG/S/PH-RH,
BI-36UG/S/PH-LH, BI-36UG/S/TH-RH , BI-36UG/S/TH-LH, etc., will utilize common functional parts. For this rea-
son, only the basic model numbers are used in this manual , unless otherwise specified.
1-6
General Information
Built-In (BI) Series
Built-In (BI) Series
#7005333 - Revision A - January, 2008
Model Line and
Domestic/International Identifier:
BI = Domestic Built-in Model Line
ICBBI = CB Approved International
Built-in Model Line
Nominal Cabinet Width:
Currently 30”, 36”, 42” and 48”
Stainless Steel Handle Style:
NOTE: Only present if trim style
is Stainless Steel.
/TH = Tubular Handle
/PH = Pro Style Handle
/CH = Curved Handle
Model Type:
S = Side-by-Side
U = Over / Under
R = All Refrigerator
F = All Freezer
Additional Model Type Information:
NOTE: If needed.
G = Glass Refrigerator Door
A = High Altitude Glass Refrigerator Door
D = Ice & Water Dispenser
Trim Style:
/F = Framed
/O = Overlay
/S = Stainless Steel
Door Swing:
NOTE: Only present if model
is door swing sensitive.
-RH = Hinge on Right Side
-LH = Hinge on Left Side
Figure 1-2. Model Number Code
To Next Page
Loading...
Need help?
General
