PRO 48 Installation 15
subzero.com/specs
Kickplate installation.
Complete the Installation
INSTALL KICKPLATE
Make sure the drain pan is in the proper position before
installing the kickplate. To install, screw the kickplate to
brackets attached to the inside surface of each roller
base. Refer to the illustration below.
IMPORTANT NOTE: The kickplate must be removable for
service. The floor cannot interfere with removal.
Reinstall the grille by reversing the procedure outlined on
page 10. Turn power back on to the electrical outlet.
Optional Accessories
90° DOOR STOP
The doors of PRO 48 models open to 135°. For installa-
tions where the door opening must be limited, an optional
90° door stop kit is available through your authorized
Sub-Zero dealer. For local dealer information, visit the find
a showroom section of our website, subzero.com.
SIDE AND TOP PANELS
For freestanding applications, stainless steel side and top
panels are available through your authorized Sub-Zero
dealer. Installation instructions are provided with the
panels. For local dealer information, visit the find a
showroom section of our website, subzero.com.
To Next Page
Loading...
