IMPREZA U.S.A. (E)
10-42
HG0124
Lock pin
2. Grasp the wheel cover with both hands by the spokes and twist
sharply in a clockwise direction until you feel the detent locking. After
twisting the wheel cover, make sure the wheel cover is locked
securely by lightly turning the wheel cover right and left.
HG0126
NOTE
When any of the wheels is removed and replaced for tire rotation
or to change a flat tire, always check the tightness of the wheel
nuts after driving approximately 600 miles (1,000 km). If any nut is
loose, tighten it to the specified torque.
To Next Page
Loading...
