IMPREZA U.S.A. (E)
10
Maintenance and service
10-57
– CONTINUED –
J License plate light
HG0198
1. Remove the mounting screws using a phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
J Interior light, spot light
OM-H0251OM-H0250
1. Remove the lens by prying the edge of the lens with a regular screw-
driver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the lens.
To Next Page
Loading...
Need help?
General
